Compensating attachable duct collar
with segmented rings
ADMFor dowelling core drills, break-throughs or wall sleeves in walls or in front of recesses on sheet steel housings. Due to the design of the system, the existing basement seal can be professionally integrated without complex post-processing work. The same component simultaneously seals the incoming media pipe.
Compensating attachable duct collar
with segmented rings
ADMFor dowelling core drills, break-throughs or wall sleeves in walls or in front of recesses on sheet steel housings. Due to the design of the system, the existing basement seal can be professionally integrated without complex post-processing work. The same component simultaneously seals the incoming media pipe.
Modular seal
Modular pipe seal
GKDFor sealing of newly to install pipes or already installed pipes inside core drilled holes or wall sleeves. The modular structure allowes installation on all kind of pipes and diameter combinations.
Modular seal
Modular pipe seal
GKDFor sealing of newly to install pipes or already installed pipes inside core drilled holes or wall sleeves. The modular structure allowes installation on all kind of pipes and diameter combinations.
Standard press seal
for rainwater utilisation systems
HSD100 RW 1x25/32/40+3x6-18 b40 A2/EPDM55For sealing new media pipes/cables to be installed or media pipes/cables that have already been laid in core drills or wall sleeves, specially adapted for rainwater utilisation systems.
Universal wall sleeve
for any type of wall
UFREnables sealing in all types of wall when combined with sealing flange and 3-bridge seals.
Sealing set
for corrugated cable ducts and media pipes
WRDFor sealing corrugated cable ducts and media pipes. The patented ring clips in the corrugated section prevent deformations and damage to the corrugated pipe and at the same time keep the closing pressure of the press seal uniform and constant. The insulation ring included in the scope of supply centres the corrugated pipe on the inside of the building and neatly finishes the wall connection.
Tundish
AT110Tundish with integrated step protection insert for setting base slab in concrete for optimum sealing to the underground sewer pipe. To compensate an offset (after concreting) between downpipe and base drain in any direction.
Pipe entries
The efficient solutions.
In addition to the conventional cable entry, a wide variety of pipes, whether drinking water pipes, gas pipes, district heating pipes or wastewater pipes, can also be introduced into any building. Here too a wide range of requirements apply to the relevant building entries. For this reason, Hauff-Technik has been involved in the development and manufacture of pipe entries since back in 1988. Press seals ensure that core drills or wall sleeves are sealed professionally in order to be absolutely gastight and watertight. Our portfolio of wall sleeve products will provide you with the ideal solution for any type of wall and any load case. Combined with our press seals, these products create the optimum sealing solution between building and supply line.
The Optimal Pipe entry for Every Area of Your Building
Around buildings, there are many different interfaces, such as various supply lines. This includes electrical and telecommunications cables, as well as wastewater pipes. Leaks in these areas can become potential entry points for moisture or radon, posing risks to both residents and the integrity of the building structure. Hence, professional pipe entry is essential for properly executed pipe penetrations. Ultimately, effectively implemented pipe seals ensure gas and water tightness.
Professional Pipe Entries in Wall Areas
In areas where wastewater pipes are routed through walls, it is essential to have a seamless pipe seal. This is especially important because these areas often contain connections between different casing pipes. Protecting the masonry and interior areas from penetrating moisture is crucial. Furthermore, a pipe seal also prevents the infiltration of gases such as radon. Hauff-Technik's solutions allow for the rapid creation of gas- and watertight pipe seals.
Ring space seals are particularly suitable for use with core drillings, casing pipes, or sealing packs. These rubber compression seals are installed directly between the core drilling or casing pipe, and sometimes between wastewater or rainwater pipes. They function similarly to sealing packs for cable penetrations. Hauff-Technik offers a variety of ring space seals tailored to different scenarios. You do not need to perform individual seals for the pipes - multiple lines can be routed through a single core drilling and sealed separately. The diameters of the pipes can be adjusted on-site thanks to Hauff-Technik's infinitely variable super-segment ring technology.
Casing Pipes and Flange Constructions for Pipe Penetrations
Hauff-Technik provides a comprehensive range of various pipes and flange constructions to securely pass lines through walls. This assortment includes universal casing pipes designed for all wall types, which can be embedded in concrete or mortared during the construction phase. Furthermore, solutions are available for the retroactive sealing of already laid supply lines, composed of two half-shells. The different casing pipes are suitable for wall thicknesses ranging from 70 to 1,200 mm.
The casing pipe can be used immediately or at a later time for the passage of lines. By utilizing pipe seals, gas- and watertight wall entries can be created. Our casing pipes are compatible with all pipe entry systems from Hauff-Technik, allowing you to effortlessly use these systems for various cables and supply lines.
Connection casing pipes allow for direct connections to DN 110 type protection pipes. These connection casing pipes include an integrated pipe seal realized through plug and adhesive sockets.
Rainwater Entries and the Appropriate Pipe Seals
Typically, every building requires a system for the effective drainage of rainwater. Rainfall can often lead to challenges during construction, especially because the system is installed both above ground and underground, as well as through various parts of the building. Hauff-Technik's solutions are compatible with casing pipes conforming to DN 100 and DN 150 standards.
For this reason, Hauff-Technik offers an extensive range of components for rainwater drainage systems. The emphasis is on the connection areas between individual pipes and the transitions within the building. For instance, the connection funnels with integrated foot protection create a seamless link between underground rainwater drainage systems and walkways, facilitating a level, trip-free installation. Moreover, the system is radon-safe and both gas- and watertight.
The wall entries from Hauff-Technik are specifically designed for embedding in concrete. These entries are available for all wall types, including double and element walls. They are intended for flush installation and feature an integrated pipe seal in the connection areas. To ensure pressure-tight integration of piping, the wall collars are equipped with a water barrier flange, making them suitable for use in floor slabs.
Help us improve our website service.
Where would you place yourself?
Architect & designer
Wholesaler
Telecoms
Utility company
Installer
Construction company
Please choose your region
-
Belgium
-
Česko
-
Danmark
-
Deutschland
-
España
-
France
-
Global
-
Hrvatska
-
Italia
-
Luxembourg
-
Magyarország
-
Nederland
-
Österreich
-
Polska
-
Schweiz
-
Slovenija
-
Slovensko
-
Sverige
-
United Kingdom
-
Global
-
USA
-
Global
-
中国
-
Global
-
الإمارات العربية المتحدة
